Discover ORK's Heat Resistant Neoprene CR O-Rings Seals Perfect
Sealing Solution for Hydraulic Pneumatic Rubber Seals
Type: O Ring
Size: ID X CS, OD=ID + 2XCS
An o-ring is a simple and versatile ring-shaped packing or sealing
device with a circular cross section (from which the "O" in
its name is derived). The purpose of using O-ring seals is to
prevent leakage and loss of liquids or gases. They simplicity,
convenience, and small installation space. As long as the groove
design and material selection are correct, and the operating
conditions are within the temperature range of the rubber material,
the seal can have a long-term sealing effect in the static
or dynamic seal.
The size of o-ring is determined by the inner diameter ID and the
wire diameter CS. O-ring size calculation:
outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x
CS).
O-Ring Advantages:
1. O-Rings offer an efficient and economical sealing element for a
wide range of static or dynamic applications.
2. O-Ring sizes are defined by the inner diameter-ID and the cross
section-CS, our o-ring Inner Diameter can be from 0.5mm
to 1500mm.
3. Standard sizes such as AS568(PARKER sizes), JIS(P TYPE, G TYPE,
S TYPE, V TYPE, F TYPE sizes), BS1516 sizes Metric sizes
as well as non-standard sizes are all avaiblabe.
4. We have more than 2000 o-ring mould toolings, so you could get
any size here without set-up or tooling charge. Huge inventory
of o-rings can meet your urgent requiremnets.
5. A very wide range of elastomer material can be selected, main
material: NBR(BUNA-N, Nitrile), FKM(FKM), Silicone(VMQ), HNBR,
FFKM, EPDM, PU(Polyurethane, urethane), Fluorosilicone(FVMQ),
Neoprene(CR) and so on. Hardness of material can be from 40
ShoreA(Durometer) to 90 ShoreA(Durometer)
O-Ring Technical requirements:
Appearance meets GB/T3452.2-2007 Material meets HG/T2579-2008 Size
meets GB/T3452.1-2005
In addition, all our products are ROHS and REACH Compliant (we
mainly export products to USA and Europe market).
O-Ring Features:
1. Good sealing solution, long service life.
2. Easy installation reduces risk.
3. Working in various medium based on different elastomer material.
Neoprene Rubber Features:
| Material | CR/Neoprene/Polychloroprene |
| Advantage | 1.Excellent Abrasion-Resistance,Good Rebound Resistance |
| 2.Excellent Gas Aging Resistance |
| 3.Good Oil and Fuel Resistance |
| 4.Good Compression Resistance |
| 5.Good Fire-resistance |
| Disadvantage | 1.Poor Low Temperature Resistance |
| 2.Poor Electrical Insulation |
| Temperature | -25~150 ℃ |
| Application | For heat - resistant conveyor belt |
| For oil and chemical-resistant hose |
| For the cover of Wires and cables |
Neoprene Rubber, also known as neoprene polychloroprene, is an
extremely versatile synthetic rubber with
more than 75 years of proven performance.
In the automotive world, neoprene is used for many under-the-hood
and underbody parts that require a
reasonably priced, mid-performance polymer with a good all-around
balance of performance properties.
We have certificates :ISO 9001:2015 , ISO 14001:2015 ,ISO
45001:2018 , IATF , FDA, REACH, ROHS, SGS etc.
IATF 16949 2016.pdf
ISO 9001 2015.pdf
ISO45001.pdf
ISO 14001.pdf
CR-ROHS
CANEC23015740939(SZP23-030677).pdf
For color , we can make as customers' requirements .Below table is
the colorful o rings
we made.If you need colored o rings , you can give me pantone number .
We can also produce Automotive Rubber Seals ,Connector Rubber Seals
,Power Tool Rubber seals ,Valve
Rubber Seals ,Pipe Rubber Seals ,Semiconductor Rubber Seals
,Hydraulic Pneumatic Rubber Seals ,Pump
Rubber Seals ,Oil and Gas Seals ,Food Grade Rubber Seals ,Medical
Rubber Seals ,Chemical Equipment
Rubber Seals ...etc.
Our Factory
1. Since 2006, focus on rubber seals, especially for auto parts
2. Certificates: ISO9001, IATF16949, ISO14001, ISO45001,ISO 13485
3. Two factories, more than 18000㎡,clean room 600㎡, with 300
workers.
4. Molds > 10000 sets, especially o rings, about 5000 sets.
5.O-ring series covers American standard (AS568), Japanese standard
(JIS), national
standard(GB), and produces a large number of customized
non-standard parts.
6. Material: NBR, FKM, SIL, EPDM, CR, NR, PU, HNBR, FFKM, SBR .The rubber materials
used meet the requirements of ROHS2.0 and REACH235.
7. Material Certificates: FDA, ROHS, REACH, UL157, CP65 WRC,
EN549,EN45545.
8. Products are widely used in automotive parts, electronic
connectors, valves, pneumatics,
power tools, new energy, medical equipment, electronic products and
other fields.
9. company has introduced HRP, ERP and other systems since its
inception.
10. The company's labor cost, raw material procurement, production
process and
product quality were comprehensively and scientifically controlled.
Ruichen always meets our customers' requirements. To make sure we
produce high-quality o-rings, our company implements the
following general standards:
1) Raw material incoming inspection standard ASTM D2000 & HG/T
2579-2008 & HG/T 2811-1996
2) Public o-ring dimensional tolerance GB/T 3452.1-2005
3) N-level specification for o-ring appearance quality inspection
GB/T 3452.2-2007
4) Hardness measurement model Micro O-Ring Testing (Type M system)
5) Hardness using standard ASTM D2240 Rubber Standard Test Method
(Shore A)
6) Sampling inspection specification GB/T2828.1-20
Progress
Cooperative partner
Ruichen company have cooperated with many superior customers as
below , we have complete system and excellent productivity
to serve for you
Our service
- Quality is our culture,create value to customers is our purpose.
- Professional engineers team with more than 30 years experience are
able to provide different kinds
- of material formula according to clients requirements.
- Professional design and development for rubber&plastic parts.
- Advanced equipments with high production efficiency assure fast
delivery.
- Factory price low price and small MOQ.
- All products come out with ISIR doc and MDS,PPAP,MSDS,available.
- Not reclaimed rubber used all of our material can ROHS and REACH
compliant.
- IATF factory high quality guarantee.
- Prompt delivery 3 to 7 days for prototype tooling,10-15 days for
production tooling.
- One stop purchase service for rubber parts,plastic parts,matal
parts and aluminum parts save your
- time and costs.
- All of your information will be keep secret here.
International exhibition
Why RUICHEN?
Many big companies select RUICHEN for their rubber seals and customized rubber parts because we
always
satisfy them in quality, price, delivery, service, etc. At the same
time, we also attach great importance to the
small customers in niche markets.Whether your purchase quantity is big or small, you are our
valuable partners.
High Quality
We continue to manufacture high-quality products for all customers
and pursue 100% customer satisfaction,
which has become one of our core competencies.
Profession
We have rich experience in materials, products, and production and
excellent international trade and language
communication skills.
Best Services
From quoting, sampling, production, and shipping to after-sales,
our sales will provide you with the best service
so that you can rest assured completely.
10000+ Projects Delivered
Over 10K projects have been sent to our customers worldwide in
recent years, and we have received countless
positive comments.
Low Price
Our customers can obtain maximum profits through the ISO management
system and intelligent manufacturing
to reduce our costs continuously.
Massive Capacity
Our in-house facilities allow us to get your projects done fast.
And thanks to our strong relationship with rapid
materials partners, our capacity is not limited.
Fast Delivery
Unlimited capacity, experienced engineers, and a flexible
production system allow us to create your seals and
production parts in a short period.
1000+ Happy Customers
We aim to keep every customer happy with reliable quality, fast
turnaround, and excellent services. We want all
our new customers to become long-term customers.
FAQ
Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR,
ACM, AEM,Fluorosilicone(FVMQ),
FFKM etc.
Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we
can help select the material that will best suit your
needs while keeping material costs in mind.
Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation
within 8 hours.
Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.
Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no
mold about 25-30 days, depending on the product
situation.
Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw
materials, process inspection,to ensure the quality of the
production process, shipping 100% of the full inspection; automatic
inspection machine full inspection, and according
to customer needs before the mass production of pre-production
samples.
Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also
be packed according to customer's requirements.
Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or
L/C at sight, Paypal is also ok
