Silicone Epdm FKM Rubber O Ring Seal For Chemical Machinery AS568
PG Standard Size
Type: O Ring
Size: ID X CS, OD=ID + 2XCS
Product Details
A: Rubber O-ring seals - for binoculars, tools, automobiles, garage,
plumbers, machinery, plant,
repair, air and gas connected.
B: For professional pipe, sealing pipe and sewer repair leaks family,
bathtub, septic tanks,
hydraulic, air and gas connections, etc..
C: Oil, coolant, power steering fluid, washer fluid, Use for
mechanical,grease applications.
D: These rings are made of a very durable and pliable rubber
construction to seal contact and
connection points. They will last through long and arduous use.
E: O rings are also widely used by professional mechanics and DIY car
owners to fix engine
leaks and other leaks like oil, coolant, power steering fluid,
washer fluid, etc. Use for mechanical/
grease applications.
O-Ring Advantages:
1. O-Rings offer an efficient and economical sealing element for a
wide range of static or dynamic applications.
2. O-Ring sizes are defined by the inner diameter-ID and the cross
section-CS, our o-ring Inner Diameter can be from 0.5mm
to 1500mm.
3. Standard sizes such as AS568(PARKER sizes), JIS(P TYPE, G TYPE,
S TYPE, V TYPE, F TYPE sizes), BS1516 sizes Metric sizes
as well as non-standard sizes are all avaiblabe.
4. We have more than 2000 o-ring mould toolings, so you could get
any size here without set-up or tooling charge. Huge inventory
of o-rings can meet your urgent requiremnets.
5. A very wide range of elastomer material can be selected, main
material: NBR(BUNA-N, Nitrile), FKM(FKM), Silicone(VMQ), HNBR,
FFKM, EPDM, PU(Polyurethane, urethane), Fluorosilicone(FVMQ),
Neoprene(CR) and so on. Hardness of material can be from 40
ShoreA(Durometer) to 90 ShoreA(Durometer)
O-Ring Technical requirements:
Appearance meets GB/T3452.2-2007 Material meets HG/T2579-2008 Size
meets GB/T3452.1-2005
In addition, all our products are ROHS and REACH Compliant (we
mainly export products to USA and Europe market).
O-Ring Features:
1. Good sealing solution, long service life.
2. Easy installation reduces risk.
3. Working in various medium based on different elastomer material.
FKM, FPM(Fluorocarbon)
| Material | FKM/FPM |
| Advantage | 1,Excellent High Temperature Resistance |
| 2. Excellent Abrasion-Resistance |
| 3,Excellent Oil Resistance |
| 4.Excellent Weathering Resistance |
| 5.Excellent Ozone Resistance |
| 6.Good Water Resistance |
| Disadvantage | 1.Poor Low Temperature Resistance |
| 2.Poor Oxygenated-Solvent Resistance |
| Temperature | -20℃~250℃ , -40℃~250℃(special formula) |
| Application | 1.For Auto |
| 2.For Aerospace |
| 3.For Electronic Products |
*Service Temperature
For general type FKM the service temperature is better limited to
approximately from -26 C to 232 C in static
applications, though the service temperature can arrive to 275 C at
short time In dynamic applications, it is
suitable between -15 C and 200 C.
*Application
Because FKM has excellent resistance of high temperature, oil,
solvent, flame, chemicals and weathering, it is
usually applied in automotive, chemical processing, aerospace and
many other industries.
For color , we can make as customers' requirements .Below table is
the colorful o rings
we made.If you need colored o rings , you can give me pantone number .
Except Rubber Gasket for Electronic Home Appliances & electric seals , we can also produce rubber seals for
Automotive seals Oil & Gas seals , Coal Mining Machinery seal , Electronic Home Appliances & electric
seals ,
Chemical equipment seals , Artificial intelligence & New Energy seal , Refrigeration seals , Aerospace seals ,
Hydraulic & Pneumatic seal , Food-grade seals ,Valve & pipe seals , Pump seals ...etc.
Our Factory
Rui Chen Sealing Co., Ltd was built in 2006, now there are more
than 200 staff. The company has
two branches in Guangdong
and Jiangxi, They are Dongguan Rui Chen Sealing Co., Ltd. and
Shangrao Rui Chen Sealing Co., Ltd..
In recent years, the company has been supported by ShangRao
municipal government and fully enjoy
all the preferential policies
for economic development zone. We will always take "best quality,
best service" as our mission, and make
progress together with you, harmony and mutual win!
Ruichen always meets our customers' requirements. To make sure we
produce high-quality o-rings, our company implements the
following general standards:
1) Raw material incoming inspection standard ASTM D2000 & HG/T
2579-2008 & HG/T 2811-1996
2) Public o-ring dimensional tolerance GB/T 3452.1-2005
3) N-level specification for o-ring appearance quality inspection
GB/T 3452.2-2007
4) Hardness measurement model Micro O-Ring Testing (Type M system)
5) Hardness using standard ASTM D2240 Rubber Standard Test Method
(Shore A)
6) Sampling inspection specification GB/T2828.1-20
Progress
Cooperative partner
Ruichen company have cooperated with many superior customers as
below , we have complete system and excellent productivity
to serve for you
International exhibition
Why RUICHEN?
Many big companies select RUICHEN for their rubber seals and customized rubber parts because we
always
satisfy them in quality, price, delivery, service, etc. At the same
time, we also attach great importance to the
small customers in niche markets.Whether your purchase quantity is big or small, you are our
valuable partners.
High Quality
We continue to manufacture high-quality products for all customers
and pursue 100% customer satisfaction,
which has become one of our core competencies.
Profession
We have rich experience in materials, products, and production and
excellent international trade and language
communication skills.
Best Services
From quoting, sampling, production, and shipping to after-sales,
our sales will provide you with the best service
so that you can rest assured completely.
10000+ Projects Delivered
Over 10K projects have been sent to our customers worldwide in
recent years, and we have received countless
positive comments.
Low Price
Our customers can obtain maximum profits through the ISO management
system and intelligent manufacturing
to reduce our costs continuously.
Massive Capacity
Our in-house facilities allow us to get your projects done fast.
And thanks to our strong relationship with rapid
materials partners, our capacity is not limited.
Fast Delivery
Unlimited capacity, experienced engineers, and a flexible
production system allow us to create your seals and
production parts in a short period.
1000+ Happy Customers
We aim to keep every customer happy with reliable quality, fast
turnaround, and excellent services. We want all
our new customers to become long-term customers.
FAQ
Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR,
ACM, AEM,Fluorosilicone(FVMQ),
FFKM etc.
Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we
can help select the material that will best suit your
needs while keeping material costs in mind.
Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation
within 8 hours.
Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.
Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no
mold about 25-30 days, depending on the product
situation.
Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw
materials, process inspection,to ensure the quality of the
production process, shipping 100% of the full inspection; automatic
inspection machine full inspection, and according
to customer needs before the mass production of pre-production
samples.
Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also
be packed according to customer's requirements.
Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or
L/C at sight, Paypal is also
