| Product Name | Rubber hose |
| Materials | NBR, HNBR, EPDM, SILICONE, VITON, FLS, FFPM, FPM , PU ,ACM ,SBR |
| Temperature | NBR(-40~120°C),FFKM(-20~320°C) Viton(-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C) |
| Feature | Resistance to high pressure, oil, weather, abrasion, solvent, high
temperature, abrasion resistant, aging resistant, insulation, acid
and alkaline resistant |
| Cerfiticate | ISO 9001:2008 |
| Hardness | 30-90 shores A |
| Color | Red, Black, White, blue, green, Clear, etc |
| Size | Any size, Customized/standard and nonstandard |
| Sample time | If instock, within 3 days after payment |
| Delivery time | 7-15 days by express after payment 10-20 days by ship |
| Shipping | Small quantity: UPS/FeDex/DHL express Large quantity: by Air/Sea |
| Customized | OEM & ODM are welcomed |
| packing | plastic bag&carton box or according to your requirements |
| Application | chemical industry, petroleum industry, medical technique, food
industry, sewage-disposal industry, steel industry, semi-conduct
industry and so on. |
We can supply material as NBR, FKM, SIL, EPDM, CR, NR, PU, HNBR,
FFKM, ACM ,SBR , FLS , etc...
What's Each Rubber's Typical Features ?
NBR Rubber Features:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to
petroleum oils as well as mineral and vegetable oil. Nitrile rubber
also offers strong resistance to heat aging - often a key advantage
over natural rubber.
Nitrile rubber performs well in carburetor and fuel pump
diaphragms, aircraft hoses, seals and gaskets as well as oil-lined
tubing. Due to its versatility, nitrile is used in applications
involving not only oil and fuel resistance, but those applications
requiring resistance to heat, abrasion, water, and gas
permeability.
FKM Rubber Features:
Viton belongs to the Fluoroelastomers (FKM/FPM) group of rubber
compounds. There are many grades and hardness variations to solve
most applications with various formulations to meet specific
requirements of temperature and chemical resistance. Typical uses
include:excellent heat resistance,good mechanical properties,good
compression set resistance,resistance to wide range of oils and
fuels,resistance to solvents; especially all aliphatic, aromatic
and halogenated hydrocarbons and acids.
EPDM Rubber Features:
EPDM rubber is a high density rubber primarily used for outdoor
applications. It has dynamic and mechanical properties between
natural rubber and synthetic rubber.
Do not use EPDM if continual contact with petroleum based products
is required.
Not recommended for usage in food applications or those that are
exposed to aromatic hydrocarbons.
HNBR Rubber Features:
Hydrogenated Nitrile Butadiene Rubber (HNBR), also known as Highly
SaturatedNitrile (HSN), is special class of nitrile rubber (NBR)
that has been hydrogenated to increase saturation of the butadiene
segment of the carbon polymer backbone. Subsequent improvements to
the material properties, over that of a nitrile rubber (NBR),
include greater thermal stability, broader chemical resistance, and
greater tensile strength.
HNBR is classified by ASTM as a DH-type polymer. This
classification indicates 150ºC service temperature as well as less
than 30% swell in IRM 903 oil. HNBR can be formulated to meet
application temperatures ranging between -50°C and 165ºC.
SBR Rubber Features:
1.Main materials: Styrene-butadiene rubber (SBR), a general-purpose
synthetic rubber,produced from a copolymer of styrene and
butadiene. Exceeding all other synthetic rubbers in consumption,
SBR is used in great quantities in automobile and truck tires,
generally as an abrasion-resistant replacement for natural rubber
(produced from polyisoprene).
2.Available place: They are widely used in automobile, electrical
appliances, building vibration isolation and other industry. For
example, air blower, water pump, instrument, measuring of ships and
so on.
3.Main performance: SBR has similar chemical and physical
properties to natural rubber, with generally better abrasion
resistance,outstanding strength,good creep and stress relaxation
resistance and low cost,etc. It is not recommended to use SBR in
applications that involve ozone, strong acids, oils, greases, fats
and most hydrocarbons.
Neoprene Rubber Features:
Neoprene Rubber, also known as neoprene polychloroprene, is an
extremely versatile synthetic rubber with more than 75 years of
proven performance.
In the automotive world, neoprene is used for many under-the-hood
and underbody parts that require a reasonably priced,
mid-performance polymer with a good all-around balance of
performance properties.
Natural Rubber Features:
Natural rubber was originally derived from latex found in the sap
of rubber trees. The purified form of natural rubber can also be
produced synthetically. Natural rubber is an ideal polymer for
dynamic or static engineering applications.
Caution: Natural rubber is not recommended for applications where
the rubber part will be exposed to ozone, oils, or solvents.
PU/Polyurethane Rubber Features:
Polyurethane is an organic polymer. Polyurethanes are formed by
reacting a polyol (an alcohol with more than two reactive hydroxyl
groups per molecule) with a diisocyanate or a polymeric isocyanate
in the presence of suitable catalysts and additives. Polyurethane
is a widely used compound due to its superior strength, tear and
abrasion resistance. Polyurethane also provides excellent
permeation resistance.
Features:
- Good hydraulic oil and gasoline resistance
- Resistant to pure aliphatic hydrocarbons (propane, butane, fuel)
- Resistance to mineral and silicone oils and greases
- Resistant to water, oxygen, ozone and aging
- Excellent tear and abrasion resistance
- Available in multiple types and compounds to meet performance and
cost requirements
For color , we can make as customers' requirements .Below table is
the colorful o rings
we made.If you need colored o rings , you can give me pantone number .
We can also produce Automotive Rubber Seals ,Connector Rubber Seals
,Power Tool Rubber seals ,Valve
Rubber Seals ,Pipe Rubber Seals ,Semiconductor Rubber Seals
,Hydraulic Pneumatic Rubber Seals ,Pump
Rubber Seals ,Oil and Gas Seals ,Food Grade Rubber Seals ,Medical
Rubber Seals ,Chemical Equipment
Rubber Seals ...etc.
Our Factory
1. Since 2006, focus on rubber seals, especially for auto parts
2. Certificates: ISO9001, IATF16949, ISO14001, ISO45001,ISO 13485
3. Two factories, more than 18000㎡,clean room 600㎡, with 300
workers.
4. Molds > 10000 sets, especially o rings, about 5000 sets.
5.O-ring series covers American standard (AS568), Japanese standard
(JIS), national
standard(GB), and produces a large number of customized
non-standard parts.
6. Material: NBR, FKM, SIL, EPDM, CR, NR, PU, HNBR, FFKM, SBR .The rubber materials
used meet the requirements of ROHS2.0 and REACH235.
7. Material Certificates: FDA, ROHS, REACH, UL157, CP65 WRC,
EN549,EN45545.
8. Products are widely used in automotive parts, electronic
connectors, valves, pneumatics,
power tools, new energy, medical equipment, electronic products and
other fields.
9. company has introduced HRP, ERP and other systems since its
inception.
10. The company's labor cost, raw material procurement, production
process and
product quality were comprehensively and scientifically controlled.
Our strength:
PROFESSIONAL OEM & ODM 30+ YEARS OF RUBBER SEALING MANUFACTURER
☆ PROFESSIONAL OEM & ODM 30+ YEARS OF RUBBER SEALING MANUFACTURER
☆ FULL RANGE OF MOLDS OVER 10,000+
☆ PROFESSIONAL TEAM PROVIDE EFFICIENT TRADING SERVICE
☆ STRICT QUALITY CONTROL--QUALITY GUARANTEE
☆ OWNED A TESTING LABORATORY WITH SOPHISTICATED TEST EQUIPMENT
☆ ADVANCED EQUIPMENTS: 50+ CURING MACHINE 8 CCD AUTOMATIC
INSPECTION MACHINE 8 ALL-IN-ONE MACHINE
Progress
Cooperative partner
Ruichen company have cooperated with many superior customers as
below , we have complete system and excellent productivity
to serve for you
International exhibition
Why RUICHEN?
Many big companies select RUICHEN for their rubber seals and customized rubber parts because we
always
satisfy them in quality, price, delivery, service, etc. At the same
time, we also attach great importance to the
small customers in niche markets.Whether your purchase quantity is big or small, you are our
valuable partners.
High Quality
We continue to manufacture high-quality products for all customers
and pursue 100% customer satisfaction,
which has become one of our core competencies.
Profession
We have rich experience in materials, products, and production and
excellent international trade and language
communication skills.
Best Services
From quoting, sampling, production, and shipping to after-sales,
our sales will provide you with the best service
so that you can rest assured completely.
10000+ Projects Delivered
Over 10K projects have been sent to our customers worldwide in
recent years, and we have received countless
positive comments.
Low Price
Our customers can obtain maximum profits through the ISO management
system and intelligent manufacturing
to reduce our costs continuously.
Massive Capacity
Our in-house facilities allow us to get your projects done fast.
And thanks to our strong relationship with rapid
materials partners, our capacity is not limited.
Fast Delivery
Unlimited capacity, experienced engineers, and a flexible
production system allow us to create your seals and
production parts in a short period.
1000+ Happy Customers
We aim to keep every customer happy with reliable quality, fast
turnaround, and excellent services. We want all
our new customers to become long-term customers.
FAQ
Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR,
ACM, AEM,Fluorosilicone(FVMQ),
FFKM etc.
Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we
can help select the material that will best suit your
needs while keeping material costs in mind.
Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation
within 8 hours.
Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.
Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no
mold about 25-30 days, depending on the product
situation.
Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw
materials, process inspection,to ensure the quality of the
production process, shipping 100% of the full inspection; automatic
inspection machine full inspection, and according
to customer needs before the mass production of pre-production
samples.
Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also
be packed according to customer's requirements.
Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or
L/C at sight, P
